Over 35yrs trusted service
Knaresborough stove supply and fitting
HETAS-registered wood burning stove, log burner and multifuel stove supply and fitting for Knaresborough, Scriven, Ferrensby, Goldsborough, Farnham, Nidd and Little Ribston.
Supply and fit
Carl Finnell supplies and installs wood burning stoves, log burners and multifuel stoves across Knaresborough and the villages around it. The useful specification starts with the room and chimney, because an older riverside market-town property needs more thought than a basic appliance swap.
Knaresborough is a historic market town on the River Nidd, shaped by the Nidd gorge, the railway viaduct, the clifftop castle ruins and the market square. Georgian and Victorian townhouses, stone cottages, steep riverside plots, village farmhouses and conversions all ask different questions of the flue, hearth and stove output.
Log burner and wood burning stove are two names for the same appliance, while a multifuel stove is built for wood and approved smokeless fuel. For a Knaresborough property, the survey turns those search terms into the right output, liner, cowl, hearth, chamber and HETAS certificate.
Local proof
Case study
This is a genuine in-town Knaresborough project: a bespoke Gritstone fireplace with a sweeping curved header, framing an Acquisitions Bloomsbury 5kW multifuel stove with an arched door.
Read the Knaresborough case studyKnaresborough fit
Older townhouses around the market square, castle side streets and routes above the gorge often have chimneys built for open fires. A modern stove usually works best with a correctly sized stainless steel liner, matched to the appliance and swept before commissioning.
Steep ground, tight access and tall flue runs near the River Nidd can change the installation method. We check access, pot position, roof approach, flue route and terminal detail before confirming the final quote.
Village farmhouses around Goldsborough, Farnham, Nidd and Little Ribston can need wider hearths and careful output sizing. Conversions with no usable chimney may need a twin-wall insulated flue designed around the building.
Stove options
The right stove depends on output first, then fuel type, then style. A compact sitting room in a Knaresborough townhouse may suit a clean 4 to 5kW wood burning stove. A larger farmhouse room may need more output, but only if the room volume, chimney draw, air supply and hearth dimensions support it.
The recommendations below are sensible starting points for log burners in Knaresborough. The survey is still where the final choice is made, because chimney condition, riverside access, steep ground, DEFRA position, twin-wall routing and the fireplace finish can all change the answer.
Survey detail
In Knaresborough the survey starts with the chimney and the access. Townhouses around the market square and castle side streets often have flues built for open fires, so we sweep, inspect and size a stainless liner, comparing 316 and 904 chimney liners for daily use. On steep plots above the Nidd, we also check how the roof and pot can be reached safely.
In older market-town and townhouse fireplaces, the visible finish matters as much as the appliance. A Knaresborough room may need a brick or stone stove chamber, a cut hearth, a natural beam or a full fireplace setting that respects the age of the building.
Village conversions around Goldsborough, Farnham and Nidd may need a twin-wall flue route designed around the building. The installation page, the chimney liner page and the stove regulations guide explain the rest.
Coverage
We cover Knaresborough, Scriven, Ferrensby, Goldsborough, Farnham, Nidd and Little Ribston, with Harrogate and Wetherby as nearby area hubs.
The Knaresborough area guide covers fireplaces, liners and servicing, the Knaresborough hearths page covers tiled and Victorian hearths, and the Lands Lane Bloomsbury project shows a complete in-town installation.
Cost guidance
Two installed packages are published: the CF1 wood-burning stove offer at £2,450, against a package value of £3,780, and the T400 cassette stove and fireplace package at £3,150, against £4,425.
A Knaresborough quote often depends on access as well as the flue: the access method for a steep riverside plot, a liner and anti-downdraught cowl as at Lands Lane, or a bespoke stone fireplace around the stove. See log burner installation cost and the installation cost guide.
HETAS Registration Number 2087
HETAS registered
Carl self-certifies every installation and notifies Building Control on your behalf, so the work is signed off properly and your certificate of compliance is issued for your records.
Knaresborough questions
Yes. Carl Finnell supplies and fits wood burning stoves, log burners and multifuel stoves across Knaresborough, Scriven, Ferrensby, Goldsborough, Farnham, Nidd, Little Ribston and nearby villages.
Often, yes. Georgian and Victorian townhouses around the market square, castle side streets and older routes out of town often have chimneys built for open fires. A correctly sized stainless steel liner helps a modern stove draw properly and makes sweeping more reliable.
They can take more planning. Steep plots, tight access, tall flue runs and unusual routes above the River Nidd are all survey details. The answer is to check access, chimney condition and terminal position before confirming the stove and liner specification.
Farmhouse rooms often have larger volumes, thicker walls and wider openings, but that does not automatically mean the biggest stove. We size the appliance from the room, chimney, intended use and ventilation requirement.
Often, yes. If there is no usable chimney, a twin-wall insulated flue can be designed from scratch. The survey checks the route, roofline, brackets, clearances, hearth position and how visible the finished flue will be.
It depends on the exact address. North Yorkshire Council designates any smoke control areas in and around Knaresborough for defined areas, so we check the property during the survey and specify a DEFRA-exempt appliance where the rules apply.
Current published installed packages include £2,450 for the CF1 offer and £3,150 for the cassette stove and fireplace package. The final quote follows the survey.
Yes. We cover Knaresborough and its surrounds, including Scriven, Ferrensby, Goldsborough, Farnham, Nidd and Little Ribston, as well as the routes toward Harrogate and Wetherby.
Yes. On Lands Lane we fitted an Acquisitions Bloomsbury 5kW multifuel stove inside a bespoke Gritstone fireplace, with a flexible liner, an anti-downdraught cowl and a carbon monoxide alarm.
Yes, if the stove, chamber, hearth, liner and surround are designed together. The aim is a properly certified installation that respects the proportions of the room rather than turning a period fireplace into a generic opening.
No. Carl Finnell works from home surveys rather than a showroom in Knaresborough. Carl comes to the property, checks the room, chimney and access, and puts the options into one written quotation.
Next step
Send the enquiry, or call 07868 267002, to book a free survey in Knaresborough, Scriven, Ferrensby or Goldsborough. Carl checks the chimney, the access and the fireplace, then sends one written quote.
Your enquiry
Our home survey expert will review your details and email you about the next steps.
HETAS-registered installs. We cover Leeds, Harrogate, Wetherby, York, Ripon, Malton, Thirsk and Scarborough.
Not ready for a survey? Call or email us →
