Case study
A hanging stove in a converted chapel
This bespoke installation was designed and completed in a beautifully converted former chapel in Bedale, North Yorkshire. The client wanted a striking centrepiece to suit the character and scale of the building, so we selected the Dik Geurts Oval hanging stove. The result is a stunning focal point that perfectly suits the vaulted interior while providing efficient, contemporary heating.
Planning the installation
Measured to the millimetre
With a suspended stove, careful planning is essential. When ordering the appliance, the length of the first section of flue pipe attached to the stove must be specified, as this determines the finished height of the appliance above the floor.
Several key measurements were therefore confirmed before the order was placed with the manufacturer in the Netherlands, ensuring the stove was positioned exactly as intended.
Bespoke support bracket
A structure that is a feature in its own right
The joiner had already created a large opening, with a clear view through to the vaulted ceiling around seven metres above. It was important that the supporting structure complemented both the stove and the surrounding architecture.
Our office designed and fully detailed a bespoke steel support bracket, approved by the client before being manufactured by a local steel fabricator. Once completed, it was professionally powder coated in a colour matched to the stove for a seamless, high-quality finish.
The finished bracket not only provides the necessary structural support but also forms a striking architectural feature in its own right. We believe every installation should enhance the interior of a property, creating a beautiful focal point as well as providing warmth.
Bespoke hearth and furniture
Curves that echo the stove
To complement the suspended stove, we designed a custom-shaped hearth that follows the elegant curves of the appliance, reinforcing the contemporary design and creating another distinctive feature within the room.
Using the same material, we also produced a matching coffee table top, helping to tie the overall design together and create a cohesive living space.
Seven metres of flue,
and not a detail left to chance.
The flue system
Performance that stays out of the way
Above the initial appliance connection, we installed approximately 7 metres of premium European twin-wall insulated stainless steel flue, finished in a durable matt black powder coating. The insulated twin-wall construction provides excellent flue performance while maintaining the required safe clearances to combustible materials throughout the building.
The result is a flue system that not only performs exceptionally well but also complements the clean, minimalist appearance of the hanging stove.
Home survey and design
Involved from the drawing board
Installations of this nature are typically completed as part of a new build or major renovation project. To ensure every element fits together correctly, we recommend carrying out a comprehensive home survey early in the design process.
We regularly work alongside architects, builders and interior designers, using architectural drawings and plans where available. By becoming involved at an early stage, we can ensure the stove, flue system and supporting structure are fully integrated into the building design, delivering a safe installation with an outstanding visual finish.
HETAS registered
Installed with care, certified with confidence
Carl self-certifies every installation and notifies Building Control on your behalf, so the work is signed off properly and your certificate of compliance is issued for your records.
- HETAS-registered installer
- Certificate of compliance issued
- Meets your home insurance
Book your free home survey
Tell us where you are and what you are thinking
Send a few details and we will call to arrange a visit, bring samples and give you a proper quote. No pressure and no obligation.
HETAS-registered installs. We cover York, Malton, Helmsley, Pickering, Thirsk, Selby, Driffield and across Yorkshire.